Download PDF
Adroit Technologies > Case Studies > Star Refrigeration
Adroit Technologies Logo

Star Refrigeration

Star Refrigeration - IoT ONE Case Study
Technology Category
  • Automation & Control - Supervisory Control & Data Acquisition (SCADA)
  • Sensors - Pressure Sensors
  • Sensors - Temperature Sensors
  • Sensors - Utility Meters
Applicable Industries
  • Construction & Infrastructure
Applicable Functions
  • Process Manufacturing
Use Cases
  • Machine Condition Monitoring
The Challenge

Star Refrigeration’s TELSTAR control system uses the LonWorks® network. This fieldbus network has become the standard for the building management industry, which encompasses refrigeration and air conditioning. Star’s Electronic Systems Manager and Senior Development Engineers needed to source a SCADA HMI which would fulfil their data acquisition and monitoring requirements and match their networking needs. The ability to fit into LonWorks was a key requirement for the project. Adroit adopted a close, co-operative approach and adapted their SCADA HMI by writing a comprehensive interface to the LonWorks network. The Adroit SCADA HMI monitors data and performance of industrial refrigeration plants manufactured and installed by Star. In addition, the system provides an operator interface for altering plant control, with appropriate levels of security, using the TELSTAR system. The software is now the main data monitoring operator interface for TELSTAR, and is used in applications ranging from ice rinks and air conditioning to pharmaceuticals, distilling, fish processing and food storage. Star’s Development Engineers received training from Adroit, attending Adroit 2 + 1, a fast track course designed for system integrators and experienced end users, and the Adroit Advanced course. Star Refrigeration staff are now able to carry out their own in-house Adroit training for operators.

The Customer
Star Refrigeration
About The Customer
Background Based in Glasgow, Star Refrigeration was established in 1970 and now employs 250 people. The company is a leader in the UK industrial refrigeration market, providing a complete design, management, installation and maintenance service to the foo
The Solution

In each application, the Adroit SCADA HMI is installed as a “node” on the LonWorks network, on a Windows NT PC. Star’s customers receive a system complete with a PC located in a cabinet in the refrigerator plant room or in the local engineer’s office. There is a cable connection from the PC to the control nodes. Adroit monitors and reports on temperatures of areas and products that end users require to be cooled. Pressures, on/off states, motor currents and electricity consumption are also monitored. This information is typically used by customers for validation - such as temperatures of cold stores and duty sensor monitoring - and data is also gathered on all aspects of the refrigeration plant for diagnostic purposes. Adroit provides remote communication to Star Refrigeration’s regional offices for notification of alarms and faults and also to facilitate maintenance. Using a modem link, Adroit interfaces with the offices’ PC based system which, when necessary, transmits an appropriate report to a standby engineer via a national monitoring bureau. All Star Refrigeration’s service engineers, in addition to the relevant office-based staff, have the capability to dial into end users’ sites and use the on-site Adroit SCADA HMI to monitor the refrigeration plant. This is carried out regularly, as part of customers’ maintenance agreements. Data from Adroit is exported to Microsoft Excel spreadsheets to provide maintenance reports. Star Refrigeration keeps logged information accessible for display for a month and thereafter stores the information on the PC hard disk for up to a year. The Adroit SCADA HMI’s range of logging functions have all proved useful, including trending and event logging. Adroit’s unique Plant VCR functionality has been particularly beneficial. This ‘video playback’ feature enables operators to replay, using various frame rates, chosen sequences of plant automation history in either text format or mimic format. Users can select the timeframe they wish to view then play, rewind, fast-forward or pause using on-screen controls similar to those on a household video recorder. Multiple mimics can be viewed simultaneously, with varying or synchronised start times. Users can view events in context, without needing to analyse large quantities of data. The graphical displays can also be used in conjunction with trends and mathematical data to provide indepth analysis of events. No extra configuration is needed as the feature is a standard component of the Adroit software. In terms of the future expansion of the project, Star aims to promote the Adroit system to all major refrigeration plant customers using TELSTAR. The company is also looking at the possibility of using Adroit as a replacement regional ‘server’ for communicating with its standby engineers.

Data Collected
Electricity Meters, Fridge Temperature, Motor Current
Operational Impact
  • [Process Optimization - Remote Diagnostics]
    Adroit’s Plant VCR has improved Star’s diagnostic capability via video playback, saving many hours on site.
  • [Data Management - Data Visualization]
    Star Refrigeration and its customers have rapid, straightforward access to vast records of logged information. Adroit is providing impressive mimic/graphic display capabilities, including trending of up to 8 parameters per page.

Related Case Studies.

Case Study
IoT System for Tunnel Construction
The Zenitaka Corporation ('Zenitaka') has two major business areas: its architectural business focuses on structures such as government buildings, office buildings, and commercial facilities, while its civil engineering business is targeted at structures such as tunnels, bridges and dams. Within these areas, there presented two issues that have always persisted in regard to the construction of mountain tunnels. These issues are 'improving safety" and "reducing energy consumption". Mountain tunnels construction requires a massive amount of electricity. This is because there are many kinds of electrical equipment being used day and night, including construction machinery, construction lighting, and ventilating fan. Despite this, the amount of power consumption is generally not tightly managed. In many cases, the exact amount of power consumption is only ascertained when the bill from the power company becomes available. Sometimes, corporations install demand-monitoring equipment to help curb the maximum power demanded. However, even in these cases, the devices only allow the total volume of power consumption to be ascertained, or they may issue warnings to prevent the contracted volume of power from being exceeded. In order to tackle the issue of reducing power consumption, it was first necessary to obtain an accurate breakdown of how much power was being used in each particular area. In other words, we needed to be able to visualize the amount of power being consumed. Safety, was also not being managed very rigorously. Even now, tunnel construction sites often use a 'name label' system for managing entry into the work site. Specifically, red labels with white reverse sides that bear the workers' names on both sides are displayed at the tunnel work site entrance. The workers themselves then flip the name label to the appropriate side when entering or exiting from the work site to indicate whether or not they are working inside the tunnel at any given time. If a worker forgets to flip his or her name label when entering or exiting from the tunnel, management cannot be performed effectively. In order to tackle the challenges mentioned above, Zenitaka decided to build a system that could improve the safety of tunnel construction as well as reduce the amount of power consumed. In other words, this new system would facilitate a clear picture of which workers were working in each location at the mountain tunnel construction site, as well as which processes were being carried out at those respective locations at any given time. The system would maintain the safety of all workers while also carefully controlling the electrical equipment to reduce unnecessary power consumption. Having decided on the concept, our next concern was whether there existed any kind of robust hardware that would not break down at the construction work site, that could move freely in response to changes in the working environment, and that could accurately detect workers and vehicles using radio frequency identification (RFID). Given that this system would involve many components that were new to Zenitaka, we decided to enlist the cooperation of E.I.Sol Co., Ltd. ('E.I.Sol') as our joint development partner, as they had provided us with a highly practical proposal.
Learn more
Case Study
Condition Based Monitoring for Industrial Systems
A large construction aggregate plant operates 10 high horsepower Secondary Crusher Drive Motors and associated conveyor belts, producing 600 tons of product per hour. All heavy equipment requires maintenance, but the aggregate producer’s costs were greatly magnified any time that the necessary maintenance was unplanned and unscheduled. The product must be supplied to the customers on a tight time schedule to fulfill contracts, avoid penalties, and prevent the loss of future business. Furthermore, a sudden failure in one of the drive motors would cause rock to pile up in unwanted locations, extending the downtime and increasing the costs.Clearly, preventative maintenance was preferable to unexpected failures. So, twice each year, the company brought in an outside vendor to attach sensors to the motors, do vibration studies, measure bearing temperatures and attempt to assess the health of the motors. But that wasn’t enough. Unexpected breakdowns continued to occur. The aggregate producer decided to upgrade to a Condition Based Monitoring (CBM) sensor system that could continually monitor the motors in real time, apply data analytics to detect changes in motor behavior before they developed into major problems, and alert maintenance staff via email or text, anywhere they happened to be.A wired sensor network would have been cost prohibitive. An aggregate plant has numerous heavy vehicles moving around, so any cabling would have to be protected. But the plant covers 400 acres, and the cable would have to be trenched to numerous locations. Cable wasn’t going to work. The aggregate producer needed a wireless solution.
Learn more
© 2015-2024 IoT ONE Limited | Privacy Policy

Contact us

Let's talk!

* Required
* Required
* Required
* Invalid email address
By submitting this form, you agree that IoT ONE may contact you with insights and marketing messaging.
No thanks, I don't want to receive any marketing emails from IoT ONE.
Submit

Thank you for your message!
We will contact you soon.