下载PDF
Ensuring Network Service Continuity
技术
- 网络与连接 - 网络管理和分析软件
适用行业
- 金融与保险
适用功能
- 商业运营
服务
- 系统集成
挑战
The financial institution identified three main areas of improvement in their network infrastructure and service management. Firstly, they wanted to limit the risk of outage as their traditional Microsoft DHCP servers did not offer a real high availability and failover solution. Secondly, they aimed to improve IP addresses management as the use of spreadsheets showed strong limitations in terms of real time visibility over IP allocations, error prevention and scalability. Lastly, they wanted to centralize IP addresses, DNS and DHCP services that were managed as three different entities with no real consistency between them, leading to high risks of misconfigurations, low management reactivity and expensive operating costs.
关于客户
The customer is a European financial institution whose activity heavily relies on access to the Internet and the capacity to find and communicate information in real time. For such a company, network service continuity is more than a necessity, it is a business imperative. This is why the customer's network administration decided to reinforce its infrastructure with a DHCP high availability solution to ensure the continuity of its critical network services.
解决方案
To address these issues, the customer chose EfficientIP solutions. The Microsoft servers were replaced by two SOLIDserver appliances, ensuring DHCP services continuity based on an active-active DHCP failover architecture and high availability hardware platforms. Deployment and management of such architecture is fully automated and carried out in a seamless process through the SmartArchitecture. This innovation offers a set of DNS/DHCP architecture templates that can be applied to a selection of servers. Once a model has been chosen, the SmartArchitecture automatically configures all the servers according to their role in the architecture. Appliances and architectures management is centralized through a web-based platform that reconciles the IP addressing plan with the DNS and DHCP data. They can therefore manage its network services as a single entity, thus eliminating risks of double allocation or configuration mistakes while guaranteeing network consistency. Finally, a third appliance is dedicated to the NetChangeIPLocator network discovery tool. This solution provides administrators with a real-time visibility into IP address connections on the network (switch, slot, port and VLAN) and with a history of past events.
运营影响
数量效益
相关案例.
Case Study
Real-time In-vehicle Monitoring
The telematic solution provides this vital premium-adjusting information. The solution also helps detect and deter vehicle or trailer theft – as soon as a theft occurs, monitoring personnel can alert the appropriate authorities, providing an exact location.“With more and more insurance companies and major fleet operators interested in monitoring driver behaviour on the grounds of road safety, efficient logistics and costs, the market for this type of device and associated e-business services is growing rapidly within Italy and the rest of Europe,” says Franco.“The insurance companies are especially interested in the pay-per-use and pay-as-you-drive applications while other organisations employ the technology for road user charging.”“One million vehicles in Italy currently carry such devices and forecasts indicate that the European market will increase tenfold by 2014.However, for our technology to work effectively, we needed a highly reliable wireless data network to carry the information between the vehicles and monitoring stations.”
Case Study
Safety First with Folksam
The competitiveness of the car insurance market is driving UBI growth as a means for insurance companies to differentiate their customer propositions as well as improving operational efficiency. An insurance model - usage-based insurance ("UBI") - offers possibilities for insurers to do more efficient market segmentation and accurate risk assessment and pricing. Insurers require an IoT solution for the purpose of data collection and performance analysis
Case Study
Smooth Transition to Energy Savings
The building was equipped with four end-of-life Trane water cooled chillers, located in the basement. Johnson Controls installed four York water cooled centrifugal chillers with unit mounted variable speed drives and a total installed cooling capacity of 6,8 MW. Each chiller has a capacity of 1,6 MW (variable to 1.9MW depending upon condenser water temperatures). Johnson Controls needed to design the equipment in such way that it would fit the dimensional constraints of the existing plant area and plant access route but also the specific performance requirements of the client. Morgan Stanley required the chiller plant to match the building load profile, turn down to match the low load requirement when needed and provide an improvement in the Energy Efficiency Ratio across the entire operating range. Other requirements were a reduction in the chiller noise level to improve the working environment in the plant room and a wide operating envelope coupled with intelligent controls to allow possible variation in both flow rate and temperature. The latter was needed to leverage increased capacity from a reduced number of machines during the different installation phases and allow future enhancement to a variable primary flow system.
Case Study
Automated Pallet Labeling Solution for SPR Packaging
SPR Packaging, an American supplier of packaging solutions, was in search of an automated pallet labeling solution that could meet their immediate and future needs. They aimed to equip their lines with automatic printer applicators, but also required a solution that could interface with their accounting software. The challenge was to find a system that could read a 2D code on pallets at the stretch wrapper, track the pallet, and flag any pallets with unread barcodes for inspection. The pallets could be single or double stacked, and the system needed to be able to differentiate between the two. SPR Packaging sought a system integrator with extensive experience in advanced printing and tracking solutions to provide a complete traceability system.
Case Study
Transforming insurance pricing while improving driver safety
The Internet of Things (IoT) is revolutionizing the car insurance industry on a scale not seen since the introduction of the car itself. For decades, premiums have been calculated using proxy-based risk assessment models and historical data. Today, a growing number of innovative companies such as Quebec-based Industrielle Alliance are moving to usage-based insurance (UBI) models, driven by the advancement of telematics technologies and smart tracking devices.
Case Study
MasterCard Improves Customer Experience Through Self-Service Data Prep
Derek Madison, Leader of Business Financial Support at MasterCard, oversees the validation of transactions and cash between two systems, whether they’re MasterCard owned or not. He was charged with identifying new ways to increase efficiency and improve MasterCard processes. At the outset, the 13-person team had to manually reconcile system interfaces using reports that resided on the company’s mainframe. Their first order of business each day was to print 20-30 individual, multi-page reports. Using a ruler to keep their place within each report, they would then hand-key the relevant data, line by line, into Excel for validation. “We’re talking about a task that took 40-80 hours each week,” recalls Madison, “As a growing company with rapidly expanding product offerings, we had to find a better way to prepare this data for analysis.”
