Download PDF
Case Studies > PrismTech - Distributed Autonomous Microgrid Control

PrismTech - Distributed Autonomous Microgrid Control

PrismTech - Distributed Autonomous Microgrid Control - IoT ONE Case Study
Technology Category
  • Analytics & Modeling - Real Time Analytics
  • Functional Applications - Remote Monitoring & Control Systems
Applicable Industries
  • Renewable Energy
Applicable Functions
  • Business Operation
Use Cases
  • Microgrid
The Challenge

The next generation of energy grids will need to adopt new approaches for the integration of distributed grid-edge devices and equipment from many different manufacturers to realize operational benefits. Existing systems that were designed to support a small number of large generation facilities will be faced with the need to integrate an increasing number of Distributed Energy Resources (DERs) such as wind, solar and electricity storage into existing power generation and distribution networks.

About The Customer
Any client that requires an effective management of their energy power system. This solution is especially pertinent to client in the renewable energy sector (solar,wind) whose energy power system architecture employs distributed power generation.
The Solution

A new architecture for microgrid control is needed to deliver benefits that are not sufficiently met by existing utility infrastructure, including scalable data and information management, near real-time response times, enhanced situational awareness, interchangeability, distributed control, greater energy efficiency and reduced total cost of ownership. In 2013, US utility giant Duke Energy formed the “Coalition of the Willing”(COW), a consortium of grid technology vendors focused on the promotion and adoption of an Open Architecture approach to standardizing the way gridedge technologies are integrated together. All COW members must implement interoperable communication protocols that conform to open standards. These protocols must also conform to the Common Information Model (CIM) utility standard. The protocols are used as the basis of a common communication backbone called the “Field Message Bus” which is used to connect edgedevices via standardized nodes deployed by Duke Energy. The core communication protocol that must be supported is the Object Management Group’s Data Distribution Service for Real-time Systems (DDS) standard. DDS implementations including PrismTech’s Vortex are being used by the consortium to provide a high performance, fault tolerant, secure, real-time interoperable data connectivity layer between microgrids and centralized management systems. DDS can be used to unify operational control for the edge-grid devices and enable substation automation, while at the same time making important real-time data available to the centralized systems

Data Collected
Alarms For Automated Applications, Energy Consumption Rate, Energy Production, Fault Detection, Feedback Control Response Time
Operational Impact
  • [Efficiency Improvement - Issue Response]
    The reduction in feedback control reaction time allows for the system to react dynamically to any sudden changes such as as a sudden drop in the wind powering a farm of turbines.The distributed management system can automatically and in real-time respond to sudden changes and effect the appropriate correcting measures.
  • [Efficiency Improvement - Operation]
    The system is helping address the key issue of intermittent availability of supply when deploying renewables as part of an integrated generation system.
Quantitative Benefit

  • Distributed Autonomous Microgrid Control has the ability to reduce the feedback control process from minutes to less than 10 seconds.

Related Case Studies.

Case Study
Siemens Wind Power
Wind provides clean, renewable energy. The core concept is simple: wind turbines spin blades to generate power. However, today's systems are anything but simple. Modern wind turbines have blades that sweep a 120 meter circle, cost more than 1 million dollars and generate multiple megawatts of power. Each turbine may include up to 1,000 sensors and actuators – integrating strain gages, bearing monitors and power conditioning technology. The turbine can control blade speed and power generation by altering the blade pitch and power extraction. Controlling the turbine is a sophisticated job requiring many cooperating processors closing high-speed loops and implementing intelligent monitoring and optimization algorithms. But the real challenge is integrating these turbines so that they work together. A wind farm may include hundreds of turbines. They are often installed in difficult-to-access locations at sea. The farm must implement a fundamentally and truly distributed control system. Like all power systems, the goal of the farm is to match generation to load. A farm with hundreds of turbines must optimize that load by balancing the loading and generation across a wide geography. Wind, of course, is dynamic. Almost every picture of a wind farm shows a calm sea and a setting sun. But things get challenging when a storm goes through the wind farm. In a storm, the control system must decide how to take energy out of gusts to generate constant power. It must intelligently balance load across many turbines. And a critical consideration is the loading and potential damage to a half-billion-dollar installed asset. This is no environment for a slow or undependable control system. Reliability and performance are crucial.
Learn more
Case Study
Remote Monitoring and Control for a Windmill Generator
As concerns over global warming continue to grow, green technologies are becoming increasingly popular. Wind turbine companies provide an excellent alternative to burning fossil fuels by harnessing kinetic energy from the wind and converting it into electricity. A typical wind farm may include over 80 wind turbines so efficient and reliable networks to manage and control these installations are imperative. Each wind turbine includes a generator and a variety of serial components such as a water cooler, high voltage transformer, ultrasonic wind sensors, yaw gear, blade bearing, pitch cylinder, and hub controller. All of these components are controlled by a PLC and communicate with the ground host. Due to the total integration of these devices into an Ethernet network, one of our customers in the wind turbine industry needed a serial-to-Ethernet solution that can operate reliably for years without interruption.
Learn more
© 2015-2024 IoT ONE Limited | Privacy Policy

Contact us

Let's talk!

* Required
* Required
* Required
* Invalid email address
By submitting this form, you agree that IoT ONE may contact you with insights and marketing messaging.
No thanks, I don't want to receive any marketing emails from IoT ONE.
Submit

Thank you for your message!
We will contact you soon.