PC/104 Single Board Computer

The ISIS XL is a PC/104-Plus CPU board with an Intel Atom Z5xx processor up to 1.3GHz.
The ISIS XL module consists of a PC/104-Plus carrier board coupled with the Catalyst XL module and delivers the same rich feature set of the ISIS board in an extended temperature range. Requiring only 7-8W (typical), the ISIS XL delivers an unprecedented combination of features, performance, low power consumption, ruggedness and compatibility.

Remakable built-in features include an iTrax300 20-channel GPS receiver which provides full position/velocity/time functionality and an integrated security module system from Atmel that is TCG v1.2 compatible.

  • Eurotech
    Eurotech is a global company focusing on embedded computers and pervasive computing, which combines three key factors: the miniaturisation of computers capable of processing information; their spread in the real world - in buildings and machinery, on board vehicles, on persons and in the environment; and their ability to network and communicate. Year founded: 1992 Revenue: $69 million (2014) BIT: ETH
  • Open website
  • Application Industries
  • Construction & Buildings
  • Application Functions
  • Logistics & Warehousing
    Product Development
  • Machine Condition Monitoring
    Machine condition monitoring is the process of monitoring parameters such as vibration and temperature in order to identify changes that indicate a reduction in performance or impending fault. It is a necessary component of predictive maintenance solutions and allows maintenance to be scheduled prior to failure, or other actions to be taken to prevent damages to the machine and loss of production. Condition monitoring also provides value beyond improving maintenance schedules. For example, improved visibility into machine operations can indicate the root causes of product defects and can support optimization of energy consumption.
    Process Control & Optimization
    Process control and optimization (PCO) is the discipline of adjusting a process to maintain or optimize a specified set of parameters without violating process constraints. The PCO market is being driven by rising demand for energy-efficient production processes, safety and security concerns, and the development of IoT systems that can reliably predict process deviations. Fundamentally, there are three parameters that can be adjusted to affect optimal performance. - Equipment optimization: The first step is to verify that the existing equipment is being used to its fullest advantage by examining operating data to identify equipment bottlenecks. - Operating procedures: Operating procedures may vary widely from person-to-person or from shift-to-shift. Automation of the plant can help significantly. But automation will be of no help if the operators take control and run the plant in manual. - Control optimization: In a typical processing plant, such as a chemical plant or oil refinery, there are hundreds or even thousands of control loops. Each control loop is responsible for controlling one part of the process, such as maintaining a temperature, level, or flow. If the control loop is not properly designed and tuned, the process runs below its optimum. The process will be more expensive to operate, and equipment will wear out prematurely. For each control loop to run optimally, identification of sensor, valve, and tuning problems is important. It has been well documented that over 35% of control loops typically have problems. The process of continuously monitoring and optimizing the entire plant is sometimes called performance supervision.
© 2020 IoT ONE